Tout d'abord, je m'excuse pour le titre !
1/12 Scale Earth Mover 870K Hydraulic Wheel Loader (Ready to Run)
Earth Mover 870K is the most powerful wheel loader available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to work! Massive power through 350kV brushless system.
Important Note: Due to the size of this Excavator, this product has to be shipped by it self. And it will be only shipped by UPS Global Air (5-8 days), there is also an extra shipping surcharge of $450 to ship anywhere in the US and all international countries due to the size and weight. (actual shipping weight is 45kg/100lbs)
Payment Information: Due to the value of this product, all customer must pay with bank transfer. When you check out, do not choose credit card or paypal, we will refund you. Make sure choose bank transfer instead. Feel free to email us if you have any questions.
Important Note: This product is for experienced R/C users. Not recommended if you just started with R/C.
CNC machined aluminum parts
Molded steel bucket
6 channel 2.4Ghz radio
Optimized steel hydraulic system
Scale operator station (can fit a driving figure)
Massive 29.5-25L-5 tires
Reliable hydraulic valve and adjustable pump
Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm)
Powder coated in yellow
Brushless system (hydraulic)
40A brushless ESC with BEC
XXX Kv brushless monster torque motor
Realistic non functional disk break
Scale ABC plastic interior
Wheel with planetary gearbox build-in
2 speed full metal transmission (1:16 and 1:4 gear ratio)
Realistic fullfull metal axles
Run time is: XX minutes (XXXXmAh battery)
Steel machined oil pump (45mm X 30mm X 15.5mm)
Maximum bucket force: 70kg/154pounds
Driving speed: XXX meter per hour
Maximum bucket height: 461mm/18inch
Maximum bucket up and down angle: 46 to 64 degrees
Maximum bucket left and right angle: 38 degrees
Wheel base: 284mm
Total mass load: 32kg/70lbs
Operating oil pressure: 20Bar, 290psi
Manufactured by JDCustoms
30 days limited warranty
1/12 Scale Earth Mover 870K Hydraulic Wheel Loader
Additional parts needed:
- Lipo Charger (Part # Z-E0037)
- 3S 6500mAh 11.1v 20c Lipo battery (Max size: 73mm X 80mm X 132mm) (Part # Z-E0038)
- ESC support bullet connector
- RC4WD standard hydraulic oil (part # VVV-S0014)
- Shell Tellus S2 V15 Hydraulic Oil (part # VVV-S0109)
- Mobile DTE22 V22 Hydraulic Oil (part # VVV-S0111)
- Scale Heavy Duty Flat Bed Transporter
- High Intensity LED
This product is made for heavy duty usage. Since there is no plastic parts, its designed to last. But hydraulic pump, hoses and electronics system can break over time. Do not let the system overheat during usage. We will have all spare parts available for sell. Pump, hoses are electronics system is not covered under warranty, but we do guarantee fully functional at arrival. Each unit is full tested twice before we ship.
Each unit is professionally assembled, adjusted and tested. Do not adjust the oil pressure switch. Oil pressure will drop as you operate over time.
This Excavator is shipped without oil. You will have to fill the tank your self (half tank), by using a funnel or tube (not included).